JWI-530 Waterproof Indicator Setting Instructions

Instructions for setting maximum weighing capacity and divisions

1.Press and hold the key and key to turn on the indicator and enter the capacity setting. First set the password "in.0000", press key to accumulate the value. Press to shift, enter "in.8529", then press , the window will show "150.00 kg".

2.Press key to move the decimal point, press key to select the maximum range, and press key to select the unit kg, g, lb, lb.oz/斤, PCS.

Method 2: If there is no desired capacity, press and hold key to enter the free capacity setting. The leftmost digit of the window flashes. Press to Shift right, press key to modify the value; Press key to select the unit kg, g, lb, lb.oz/斤, PCS. Press to save and go to the division setting, otherwise press and hold to cancel the current setting and go back to the weighing state.

3.When the model setting is completed and the division setting is entered, the window displays " 0.01kg".

4. Method 1: Press key to select the common division, and press key to move the decimal point to the right.

Method 2: If no division is required, press and hold key to enter the free division setting (set according to the principle of 1/2/5 minimum scale).

The number on the far right of the window flashes. Press key to shift to the right and press key to modify the value; Press key to enter the calibration state after the modification is completed, otherwise a long press will cancel the current setting and return to the capacity setting.

5. When the calibration is completed after the division setting, the window shows "CAL". Press key to enter the calibration, and long press key will exit the calibration and return to the weighing state.

General Parameter Setting

1. Ingrese los parámetros: mantenga presionado durante el estado de pesaje o presione para ingresar la configuración cuando se encienda

2. Seleccione el parámetro: presione la tecla para recorrer los parámetros después de ingresar a la pantalla de parámetros

3. Establecer parámetros: después de seleccionar el parámetro, presione para ingresar a la interfaz de configuración de parámetros, presione para seleccionar el contenido del parámetro

4. Guardar configuración: después de configurar, presione para guardar la configuración y salir de la pantalla de configuración. Luego presione para volver al estado de pesaje